Veluon

Open-Ear Smart Wearable

Electronics engineeringSoftware engineeringMechanical engineeringPrototypingSupply chain

An all-day wearable providing open-ear sound through hybrid air/bone conduction, along with health monitoring, voice and gesture control, and body motion measurement.

Brief

The customer wanted to develop an all-day wearable that let the user hear their environment naturally while also being able to listen to music, navigation or calls. We needed to demonstrate that the in-ear design could work, while packaging all the processing power, communication, audio-driving circuitry (including noise cancellation) and battery into a sleek, low-weight form factor that could be worn on the ear, all day.

Deliverables

The device needed to deliver audio quality that was not a reduction from normal earbuds. After sourcing and testing a piezo driver, we determined that a hybrid approach was required: a piezo (bone conduction) covering the low frequencies and a balanced armature (air conduction) covering the mid-to-high frequencies.

This required a complex mechanical design using spring steel to provide sufficient pressure for bone conduction, while fitting a wide percentage of the population comfortably. The earpiece needed to sit far enough into the ear for the balanced armature to be effective, while keeping the open-ear design that lets the environment in naturally, rather than as a digital passthrough.

The piezo element was originally designed for haptic feedback in mobile devices, so the precision and mounting orientation our application required presented a significant manufacturing hurdle to overcome for mass production.

The device packed a large amount of electronics – audio, processing, communications, storage, along with health, environmental and activity-monitoring sensors – into a small form factor. This would ideally have used a custom ASIC, but budget constraints meant a complex 10-layer flex-rigid PCB was designed instead.

Full sourcing and negotiation of components was carried out, along with setting up a contract manufacturer.

Measurements were taken to ensure the device was not classified as a medical device, keeping it as a low-risk general wellness product. Antenna placement was crucial for both performance and ensuring safe exposure limits, and compliance testing was conducted to allow market entry.

  • Designed a hybrid bone- and air-conduction audio system to match earbud-quality sound
  • Developed a complex mechanical design to fit a wide percentage of the population comfortably
  • Overcame a significant manufacturing hurdle, adapting a haptic-feedback piezo for precision audio use
  • Designed a 10-layer flex-rigid PCB to fit all electronics into the earpiece
  • Sourced components and set up a contract manufacturer for volume production
  • Carried out regulatory testing and antenna placement to ensure safe, compliant market entry